ScriptSpot home

UWeld

Downloads

  • Version 2.02Listed version

    Listing updated

    Release notes

    v2.02 Fixed bugs

Earlier releases (6)
  • Version 2.01

    Release notes

    v2.01 full refactoring code. support Unwrap_UVW and shapes

  • Version 2.0

    Release notes

    v2.0 full refactoring code. support Unwrap_UVW and shapes

  • Version 1.9

    Release notes

    v1.9 Added support weld Subobjectlevel selected

  • Version 1.8

    Release notes

    v1.8 Completely reworked the c2015-02-17ode. Work faster, more correctly, no errors

  • Version 1.7

    Release notes

    v1.7 Fixed bugs

  • Version 1.6

    Release notes

    v1.6 Added work with Edit_Poly modifer

3ds Max compatibility
Unknown
Community compatibilityNo compatibility reports yet

No reports yet for the available releases.

Community reviewsNo reviews yet.

Listing details

Version
2.02
Author’s update date
Legacy votes
12
Listing created
How compatibility works

Compatibility comes from the author’s supported range or requirements in the original listing. A tested version records what the author tried.

“2020 unconfirmed” in the catalog means support for 3ds Max 2020 is still unknown.

Community reports record successful tests on specific releases.

Posted by

Nik

Nikolay Litvinov

More by this author

v2.02 Fixed bugs


The script welds automatically all vertices of border.
Этот инструмент автоматически спаивает вершины краёв.

Setup & notes

Install:

  • Drop *.mzp to viewport
  • Restart 3dsMax
  • Before installing, remove the last version of the folder usermacros

    Установка:

  • Перетащить *.mzp во въюпорт
  • Перезагрузить 3dsMax
  • перед установкой удалить прошлую версию из папки usermacros

    v2.01 full refactoring code. support Unwrap_UVW and shapes
    v2.0 full refactoring code. support Unwrap_UVW and shapes
    v1.9 Added support weld Subobjectlevel selected
    v1.8 Completely reworked the c2015-02-17ode. Work faster, more correctly, no errors
    v1.7 Fixed bugs
    v1.6 Added work with Edit_Poly modifer

    Comments (32)
    Артур

    3d max2016

    Приветствую, можно боле подробно куда установить файл, у меня нет папка usermacros.

    Reply to Артур
    Nikolay Litvinov

    <<

    1. Дайте полные права в свойствах безопасности папке C:\Program Files\Autodesk\3ds Max 2016
    2. Перетащите mzp во вьюпорт 3dsmax

    1. Give full permissions in the security properties for the folder C:\Program Files\Autodesk\3ds Max 2016
    2. Drag the mzp into the viewport of 3dsmax

    Reply to Nikolay Litvinov
    Артур

    3d max2016

    я перетащил файл uweld_v2.02.МЗП в папку C:\Program файлы\программы Autodesk\3ds Макс 2016. но модификатора не могу найти в программе. где искать?

    Reply to Nikolay Litvinov
    Артур

    3d max2016

    спасибо большое, наконец установил, но, модификатор больше деформирует, чем спаивает, я больше ожидал..

    Marcelo Baglione

    Install...

    Dear Nikolay Litvinov, hi,

    I changed my system. Now use Win8. I am not getting to install your excellent script in my Max 2016. Can you help me, please.

    Thanks!

    Reply to Marcelo Baglione
    Marcelo Baglione

    install...

    Dear Nikolay Litvinov,

    I got to install!!!

    How will I know if it is the new version?
    THANKS!

    Scott

    Update for 2014?

    Can you update the script to work with max 2014? I look forward to using this in my workflow.

    Reply to Scott
    Nikolay Litvinov

    _

    If what scripts is not working, then sorry. Maybe then do it.

    brujj1

    Help me install it manually

    Please help me install this manually. I drop it in view-port but it doesn't work for me. I need this very much. Where does each thing go? Where do I put the files manually? 3Ds Max 2013 64 bit. Thanks.

    Reply to brujj1
    Nikolay Litvinov

    Install:

    Drop *.mzp to viewport
    Restart 3dsMax

    Marcelo Baglione

    WELD BORDERS INSTALL...

    Dear Nikolay Litvinov, hi,

    I can´t install Weld Borders in my 3ds Max 2013.

    Can you help me, please? I don't get put the icon!!!
    Congratulations.
    Gracias,

    Marcelo Baglione, from Brazil, Rio de Janeiro

    Reply to Nikolay Litvinov
    Marcelo Baglione

    Dear Nikkit, hi!

    I don't get activate the icon. I made several attempts. Script is working, but the icon doesn't appear; the Category: Nikkit Scripts doesn't appear, also.

    Thanks,

    Marcelo Baglione

    Reply to Marcelo Baglione
    Nikolay Litvinov

    1) "Niklit Scripts" - no "Nikkit Scripts"
    2) Restart 3dsmax after drop mzp to viewport 3dsMax
    3) And what your version 3dsmax?

    Reply to Nikolay Litvinov
    Marcelo Baglione

    Dear Niki, hi.

    I work with 3ds Max 2013.
    I´ll wait your return.
    Thanks!
    Gracias,

    Marcelo Baglione
    From Brazil, Rio de Janeiro

    Reply to Nikolay Litvinov
    Marcelo Baglione

    Dear Nik, hi.The script is

    Dear Nik, hi.

    The script is working correctly in my Max 2013, with de icon, too.
    THANK YOU VERY MUCH for attention to my request!!!
    CONTRATULATIONS!
    Gracias,

    from Brazil, Rio de Janeiro

    John Schultz

    Max 2010

    I just tried this in max 2010 and it did not work. Is there a way to make it work for 2010 or is this just for newer versions?

    I would like to use this. It would come in handy but I only have max 2010. Any chance of getting a 2010 version?

    Thanks...

    Reply to John Schultz
    Nikolay Litvinov

    I'll see what's wrong. I will try to fix it for Max 2010.
    Я посмотрю в чём дело. Постараюсь исправить для Max 2010.

    Reply to Nikolay Litvinov
    John Schultz

    Thank you for the fix. It works great and a lot easier then having to do it manually.

    Very good script. This will come in handy. Thankx again...

    harumscarum

    thanks!

    большое спасибо, но к сожалению если на объекте имеются модификаторы отличные от editpoly то после применения скрипта объект превращается в editable poly с уничтожением всего стека.
    как вариант перед использованием скрипта все модификаторы copy и после применения скрипта paste обратно.

    кстати только что на глаза мне попался крайне удобный скрипт который переключает в стеке выделение на первый в списке edit poly и я подумал что если можно поправить ваш скрипт чтобы стек не коллапсился то можно было бы и добавить функциональность этого скрипта так что запуская скрипт на любом объекте он будет сам добираться до edit poly, велдить вершины и возвращаться на верх стека обратно - http://www.scriptspot.com/3ds-max/scripts/rapid-edit

    заранее благодарен, виктор

    Reply to harumscarum
    Nikolay Litvinov

    Спасибо.

    Я пока не асс в MaxScript. Ещё только учусь. И эта проблема для меня пока не решаема. Да и алгоритм этого скрипта сделан немного криво, но это не значит, что он медленно работает. Я хотел его реализовать вот так (но не получилось):

    
    (
    Weld_EP obj =(функция, работающая с Edit_Poly)
    Weld_EleP obj =(функция, работающая с Editable_Poly:)
    --Конструкция Case of
     Если модификатор это
     (
     Edit_Poly: выполнять Weld_EP obj
     Editable_Poly: выполнять Weld_EleP obj
     Editable_Mesh: выполнять Weld_EleP obj
     )
    )
    

    Но при таком алгоритме, почему то, аргумент не передаётся функции Weld_EP, то есть функции, работающей с модификатром Edit_Poly. Хотя если не использовать функцию, а обрабатывать объект на прямую, то всё хорошо выполняется.
    Поэтому я использовал другой алгоритм, заключающийся в "пробовании" выполнения операций если есть модификатор Edit_Poly, а если модификатор не Edit_Poly,- вместо ошибки выполняется операция, работающая с Editable_Poly/Mesh.
    Таким образом это не очень удачная реализация такого скрипта, но всё работает.
    Вот... И при этом ещё сделать так, чтобы стэк не коллапсился, я пока не могу. Но при возможности обязательно решу эту проблему.

    Nikolay Litvinov

    Thanks

    Update is ready

    harumscarum

    thank you

    отличная идея!
    а можно ли добавить поддержку модификатора edit poly?

    John

    Where to access?

    I installed the mzp, but can't find where to launch this script. Looked around, and must be missing it. Where is it located?

    Reply to John
    Nikolay Litvinov

    REQUIRED RESTART 3dsmax. Category Niklit Script.

    The script can be found in the All commands, while in the list of commands you press "W"

    Shawn Olson

    I don't understand

    Maybe it is too early in the morning for my brain to wake up... but I don't understand the purpose of this script. As it stands, I don't see how this is different than just going to Vertex sub-element Mode, pressing, CTR+A then press weld.

    The way I just listed above accounts for all scenarios of welding verts (welding all or arbitrary sets as well as setting prefered threshold) whereas this script only accomodates all verts... and I'm wondering what logic there is in adding this script versus just selecting all verts and using weld?

    Is there a good reason I am missing?

    Reply to Shawn Olson
    Nikolay Litvinov

    All vertices allot no sense, especially for hipoly object, and in the script. But if you want to do as you like. Get used to mine the script.
    And also to hand-solder vertices, requires 5 steps:

  • select a sub-object vertex
  • select all
  • select welding
  • welding set up
  • Apply
    And in the process of work, it is often a lot of objects should be processed in such a way
  • Reply to Nikolay Litvinov
    Shawn Olson

    Thanks for replying. Please don't feel that I am being overly critical... I just wasn't clear on how this would speed up work consistently.